BMR 93-02 F-Body K-Member w/ SBC/BBC Motor Mounts and STD. Rack Mounts - Red

Reduce weight, increase frontend rigidity, and swap a Small-Block or Big-Block Chevy engine into your F-body with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The K-members are built with provision for either factory or manual steering racks.Designed for street performance, drag race, and road race applications, BMR Tubular K-members drop weight and add loads of structural rigidity. BMRs unique K-member design features integrated frame stands that replace the factory cast iron frame stands. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. When combined with BMRs upper and lower A-arms, a minimum weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable. The K-member also comes with specially designed engine mounts allowing you to easily swap a SBC or BBC engine into your Fourth Gen F-body with no fabrication.BMR Suspensions KM005 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM005 Tubular K-members from BMR Suspension
Designed to fit 1993-2002 GM F-body;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing;Additional -inch of A-arm adjustability provides up to 4 degrees of additional camber adjustment;Works with stock A-arms or any aftermarket A-arms;Designed with engine mounts for SBC/BBC;Designed for stock steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Fitment:
Chevrolet Camaro Base 1993
Chevrolet Camaro Base 1994
Chevrolet Camaro Base 1995
Chevrolet Camaro Base 1996
Chevrolet Camaro Base 1997
Chevrolet Camaro Base 1998
Chevrolet Camaro Base 1999
Chevrolet Camaro Base 2000
Chevrolet Camaro Base 2001
Chevrolet Camaro Base 2002
Chevrolet Camaro Indianapolis 500 Pace Car 1993
Chevrolet Camaro RS 1996
Chevrolet Camaro RS 1997
Chevrolet Camaro Z28 1993
Chevrolet Camaro Z28 1994
Chevrolet Camaro Z28 1995
Chevrolet Camaro Z28 1996
Chevrolet Camaro Z28 1997
Chevrolet Camaro Z28 1998
Chevrolet Camaro Z28 1999
Chevrolet Camaro Z28 2000
Chevrolet Camaro Z28 2001
Chevrolet Camaro Z28 2002
Chevrolet Camaro Z28 SS 1998
Chevrolet Camaro Z28 SS 1999
Chevrolet Camaro Z28 SS 2000
Chevrolet Camaro Z28 SS 2001
Chevrolet Camaro Z28 SS 2002
Pontiac Firebird Base 1993
Pontiac Firebird Base 1994
Pontiac Firebird Base 1995
Pontiac Firebird Base 1996
Pontiac Firebird Base 1997
Pontiac Firebird Base 1998
Pontiac Firebird Base 1999
Pontiac Firebird Base 2000
Pontiac Firebird Base 2001
Pontiac Firebird Base 2002
Pontiac Firebird Formula 1993
Pontiac Firebird Formula 1994
Pontiac Firebird Formula 1995
Pontiac Firebird Formula 1996
Pontiac Firebird Formula 1997
Pontiac Firebird Formula 1998
Pontiac Firebird Formula 1999
Pontiac Firebird Formula 2000
Pontiac Firebird Formula 2001
Pontiac Firebird Formula 2002
Pontiac Firebird Trans Am 1993
Pontiac Firebird Trans Am 1994
Pontiac Firebird Trans Am 1995
Pontiac Firebird Trans Am 1996
Pontiac Firebird Trans Am 1997
Pontiac Firebird Trans Am 1998
Pontiac Firebird Trans Am 1999
Pontiac Firebird Trans Am 2000
Pontiac Firebird Trans Am 2001
Pontiac Firebird Trans Am 2002
Pontiac Firebird Trans Am GT 1994