Vortex Racing Rearsets Replacement Brake Light Press Switch M10 x 1.00

• Use caution when installing inline pressure switches on motorcycle models where the brake line fittings are on the inside of the master cylinder as it may result in a clearance issue with the swingarm
• Since Vortex Racing rearsets are designed primarily for racing use, Vortex can not guarantee that inline pressure switches can be installed on all models or applications
• Always check for clearance over the entire range of suspension movement to ensure that no contact will occur
• Starting Pressure 3-8kgs, Max Pressure 250/kgs/cm3, Max Current 7A@12V
• 10mm x 1.00 thread pitch

The Vortex Racing VTXRS200 brake light pressure switch is specifically designed for use with Vortex Rearsets on European and Japanese motorcycle models. This inline switch ensures that your brake light remains functional when the rear brake lever is engaged, maintaining safety and compliance during high-performance riding. The switch features a 10mm x 1.00 thread pitch, making installation straightforward on compatible models. Its starting pressure ranges from 3 to 8 kilograms, with a maximum pressure capacity of 250 kilograms per square centimeter, and it can handle a maximum current of 7 amps at 12 volts, making it reliable for racing and street riding alike. Proper installation requires caution, especially when working with brake line fittings located inside the master cylinder, as clearance issues with the swingarm may occur. Always verify clearance over the full range of suspension movement to prevent contact or damage. The Vortex Racing switch is a critical component for those seeking to retain brake light functionality with their aftermarket rearsets, ensuring legal compliance and rider safety during spirited riding. Designed primarily for racing applications, it is compatible with a variety of motorcycle models but installation suitability may vary; always confirm fitment and clearance before proceeding.

Features:

• Designed specifically for Vortex Racing rearsets in European and Japanese motorcycle applications

• Ensures brake light functionality from the rear brake lever

• Includes a 10mm x 1.00 thread pitch fitting for easy installation

• Starting pressure range of 3-8 kilograms for reliable activation

• Maximum pressure capacity of 250 kg/cm³ for durability in demanding conditions

• Maximum current capacity of 7A at 12V for consistent performance

• Caution advised when installing inline pressure switches near master cylinder fittings

• Must verify clearance over entire suspension movement range to prevent contact

• Suitable for racing use, with compatibility dependent on specific model configurations