SuperPro Front Control Arm Lower Rear Bushing Kit

Control arm bushings form the vital pivot and link between all core suspension components. SuperPro's 'offset' bushing options introduce additional positive caster into the front end suspension geometry. With a small but significant change the additional caster delivers several benefits: Improved straight-line stability and tracking; your vehicle will track straight and return to center with less driver input. Dynamic camber gain with steering angle “ the more your turn the wheel with additional caster the more both wheels will ˜camber' into the turn putting more of the tire's contact patch on the road as the suspension loads up in the corner and helping to resist the tire ˜rolling over' onto the shoulder and compromising grip. Enhanced steering weight and feel; the small caster change will weight up the steering slightly as you come off-center and the improved cornering grip delivers greater feel for the handling limit through the wheel. The caster offset bushings deliver only benefits with no negative impact on tire wear, comfort or unwanted handling behavior. SuperPro's polyurethane bushings are the culmination of nearly 5 decades of suspension expertise and development in Australia's harshest terrain. Designed with durability as a paramount feature we also bring ride and passenger comfort to the forefront of our development. Our designs and material compositions retain OEM levels of noise and harshness isolation while delivering superior performance and road manners in all conditions.

• A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
• Made with SuperPro's proprietary engineering-grade polyurethane formula
• Unaffected by extreme temperatures, oils, water or coolant
• Designed, engineered and manufactured in Australia
• Enhances your vehicles handling and performance
• Lifetime Warranty

Upgrade the front suspension of your Honda Fit with the SuperPro SPF4261K Front Control Arm Lower Rear Bushing Kit. Designed as an offset replacement for the factory control arm bushings, this kit adds positive caster to the front suspension geometry. The result is improved straight-line stability, more accurate tracking, and easier steering return-to-center with less driver correction. Additional caster also promotes dynamic camber gain as the wheels are turned, helping maintain more of the tire contact patch on the road during cornering and reducing the tendency for the tire to roll onto its shoulder under suspension load.
SuperPro offset bushings enhance steering weight and feedback without compromising everyday drivability. The modest caster adjustment provides a more connected steering feel as the wheel moves off-center, while improved cornering grip helps communicate the vehicle’s handling limits through the steering wheel. The design is intended to provide performance benefits without creating unwanted tire wear, excessive harshness, or unpredictable handling behavior. This kit is engineered for the front lower control arm rear mounting position and is a direct suspension upgrade for applicable Honda Fit models.
SuperPro polyurethane bushings are developed from nearly five decades of suspension expertise and are manufactured in Australia using the company’s proprietary engineering-grade polyurethane formula. Compared with conventional rubber bushings, the material resists deterioration caused by extreme temperatures, oil, water, and coolant while maintaining effective noise and harshness isolation. The SPF4261K is built for long-term durability, improved handling, and dependable road manners in a wide range of driving conditions. It fits 2009–2013 Honda Fit applications and is backed by SuperPro’s Lifetime Warranty.

Features:

• Offset design adds positive caster for improved straight-line stability and tracking

• Promotes dynamic camber gain during steering for improved cornering grip

• Enhances steering weight, feedback, and return-to-center response

• Direct replacement for the front lower control arm rear bushing position

• Made from SuperPro proprietary engineering-grade polyurethane

• Resists extreme temperatures, oil, water, and coolant

• Provides a durable, quieter alternative to conventional rubber bushings

• Designed, engineered, and manufactured in Australia

• Maintains ride comfort and noise isolation while improving suspension performance

• Backed by SuperPro’s Lifetime Warranty

Fitment:
Honda Fit Base 2007
Honda Fit Base 2008
Honda Fit Base 2009
Honda Fit Base 2010
Honda Fit Base 2011
Honda Fit Base 2012
Honda Fit Base 2013
Honda Fit EV 2013
Honda Fit Sport 2007
Honda Fit Sport 2008
Honda Fit Sport 2009
Honda Fit Sport 2010
Honda Fit Sport 2011
Honda Fit Sport 2012
Honda Fit Sport 2013