{"product_id":"magnaflow-2007-chevrolet-corvette-6-0l-direct-fit-converter-1","title":"Magnaflow 2007 Chevrolet Corvette 6.0L Direct Fit Converter","description":"Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5461733. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2007-2011 Chevrolet Corvette. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.\nMagnaflow California Direct-Fit Catalytic Converter\nLegal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.\n\u003cul\u003e\n  \u003cli\u003eYour trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last\u003c\/li\u003e\n  \u003cli\u003eMandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation\u003c\/li\u003e\n  \u003cli\u003eOE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration\u003c\/li\u003e\n  \u003cli\u003eMandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation\u003c\/li\u003e\n  \u003cli\u003eHigh Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life\u003c\/li\u003e\n  \u003cli\u003eExpertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency\u003c\/li\u003e\n  \u003cli\u003eExpertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency\u003c\/li\u003e\n  \u003cli\u003eYour Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance\u003c\/li\u003e\n  \u003cli\u003eSimplifies installation with essential gaskets and hardware being included in the box\u003c\/li\u003e\n  \u003cli\u003eSimplifies Installation w\/Essential Gaskets And Hardware Being Included In The Box\u003c\/li\u003e\n  \u003cli\u003eDurable 308 stainless steel MIG welds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnsure your Chevrolet Corvette operates efficiently while remaining compliant with California emissions standards with the MagnaFlow Part #5461733, a California Grade CARB compliant direct-fit catalytic converter designed for 2007 to 2011 models. Crafted from high-quality, corrosion-resistant 16-gauge 409 stainless steel, this converter features mandrel-bent tubing that maintains OEM-like flow geometry, promoting smooth exhaust flow to optimize fuel economy and engine performance. The precision-engineered spun body design, combined with a laser fusion weld, minimizes the risk of leaks and ensures durability. Installation is straightforward, with included gaskets and hardware allowing you to replace your existing converter without cutting or welding, making it suitable for DIY installation using basic tools. The robust MIG welds further enhance the converter's longevity, providing reliable service over time. This converter has been tested and certified to meet or exceed California Air Resource Board (CARB) standards, making it legal for use in all 50 states, including California, Colorado, New York, and Maine. It is important to verify your vehicle's Executive Order number and Engine Family Number for installation eligibility. The converter's design also incorporates OE-sized barbed exhaust hangers that reduce noise and vibration, contributing to a quieter driving experience while maintaining factory-like performance. Whether you're replacing a worn-out unit or upgrading your exhaust system, this MagnaFlow converter ensures your Chevrolet Corvette remains compliant and performs at its best, all while adhering to strict emissions regulations.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCARB-compliant for legal use in all 50 states, including California\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMandrel-bent tubing maintains OEM-like flow and geometry for optimal engine performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstructed from high-strength 16 gauge 409 stainless steel for excellent corrosion resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLaser fusion welds reduce leak potential and improve durability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes gaskets and hardware for an easy, no-cut installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOE-sized barbed exhaust hangers to minimize noise and vibration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eState-of-the-art 3D metrology ensures precise fitment\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReplicates OEM flow dynamics to maintain factory fuel efficiency\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned specifically for 2007-2011 Chevrolet Corvette models\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDurable MIG welds for maximum service life\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\nChevrolet Corvette Base 2007\u003cbr\u003e\nChevrolet Corvette Base 2009\u003cbr\u003e\nChevrolet Corvette Base 2010\u003cbr\u003e\nChevrolet Corvette Base 2011\u003cbr\u003e\nChevrolet Corvette Grand Sport 2010\u003cbr\u003e\nChevrolet Corvette Grand Sport 2011","brand":"Magnaflow","offers":[{"title":"Default Title","offer_id":53855473664316,"sku":"mag5461733","price":1716.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1865\/9007\/files\/f458249c53b0f9c10d7e4b2d50e085b6L.jpg?v=1784858232","url":"https:\/\/necycleshop.com\/products\/magnaflow-2007-chevrolet-corvette-6-0l-direct-fit-converter-1","provider":"NE Cycle Shop","version":"1.0","type":"link"}