KW Coilover Kit V1 Mitsubishi Lancer (CT9A) EVO 7 EVO 8 EVO 9

The KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the N?rburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving. The ideal system for customers who like to choose the custom lowering of their vehicle while counting on the extensive experience of our engineers to preset the dampers for the ultimate balance between sporty driving, comfort, and safety. For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers "Made in Germany". Every KW coilover kit undergoes extensive stress testing before production and is developed and manufactured exclusively in our company headquarters in Fichtenberg, a small in town in Germany, to meet the high standards of our KW quality management. For us as a German manufacturer, it goes without saying that our KW coilover kits will exceed the original equipment manufacturer quality and offer useful and innovative solutions. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty. 2001-2007 Mitsubishi Lancer (CT9A) EVO 7, EVO 8, EVO 9

• Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
• With the preset damping paired with vehicle specific spring rates precisely tuned by our engineers, V1 coilovers provide an optimum balance of sportiness and comfort while driving. KW takes the guess work out of setup for you.
• Composite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
• Inox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.
• Seamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.
• KW suspensions V1 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.
• Every single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery.
• Limited Lifetime Warranty - Unlimited Mileage

Upgrade your Mitsubishi Lancer (2001-2007) with the KW V1 INOX-LINE coilover kit, designed to deliver a sportier, more controlled driving experience. Crafted from high-quality stainless steel, these coilovers offer 100% corrosion resistance, ensuring long-lasting performance and durability. The system features preset damping and vehicle-specific spring rates, expertly tuned by KW engineers to achieve an optimal balance between sporty handling and ride comfort.

The elastomer bump stops with integrated dust protection prevent dirt and water from damaging the piston rod, maintaining smooth operation over time. The composite spring perches, made from wear-resistant polyamide composite with stainless-steel inserts, prevent oxidation and enhance strength, providing a stable platform for ride height adjustments. The seamless ride height adjustment feature allows for easy customization without compromising the corrosion-resistant properties of the components.

Each KW V1 coilover is hand-built in Germany and dyno-tested to ensure precise functionality. The system reduces body roll during cornering, offering a more direct and sporty handling feel. With comprehensive testing on the Nürburgring Nordschleife and the KW 7-post chassis dynamics test center, these coilovers are engineered for high performance and safety. The kit includes all necessary components for a straightforward installation process, making it ideal for enthusiasts who want to fine-tune their vehicle's stance while enjoying the renowned quality and innovation of KW.

Backed by a limited lifetime warranty and over 20 years of experience in automotive suspension technology, KW coilovers are trusted by racers, tuners, and vehicle manufacturers worldwide. Whether you're looking to improve handling or achieve your desired stance, the KW V1 INOX-LINE coilover kit offers the perfect solution for a balanced, sporty driving experience.

Features:

• Corrosion-resistant stainless steel construction for durability and long-lasting performance

• Preset damping and vehicle-specific spring rates for optimal handling

• Elastomer bump stops with integrated dust protection to prevent dirt ingress

• Wear-resistant polyamide composite spring perches with stainless-steel inserts

• Seamless ride height adjustment for easy customization

• Hand-built and dyno-tested in Germany for quality assurance

• Reduces body roll for improved sporty handling

• Designed specifically for Mitsubishi Lancer EVO 7-9 (2001-2007)

Fitment:
Mitsubishi Lancer Evolution 2003
Mitsubishi Lancer Evolution 2004
Mitsubishi Lancer Evolution 2005
Mitsubishi Lancer Evolution 2006
Mitsubishi Lancer Evolution MR 2005
Mitsubishi Lancer Evolution MR 2006
Mitsubishi Lancer Evolution RS 2005
Mitsubishi Lancer Evolution RS 2006
Mitsubishi Lancer Evolution SE 2006