Dinan 21-27 BMW M2/M3/M4 (G80/G82/G83/G87) Gloss Carbon Fiber Cold Air Intake

Equal parts function, sound, and beauty, the intake not only looks and sounds the part of something special but performs the part as well. With a 12% increase in airflow to the engine without any negative effects on inlet temperatures or pressure, the Dinan G8x system delivers on all fronts. Drawing in more unimpeded air for consumption yields more efficient turbos (less work to make the same power) with the capacity for greater power potential on modified builds. Central to the design and our obsessive-compulsive need for a symmetrical engine bay is a singular plenum that replaces the separated driver and passenger intake ducting on the stock setup. The combination of the two tracks into one enlarged and distinctive shared pathway allows 50% more volume to be achieved in this tight space in addition to simplifying the installation and improving the overall look. The center plenum gives way to enlarged airboxes that house 11% larger cotton air filters delivering superb filtration while maximizing flow. Feeding the filters are the factory grill inlets as well as additional cutouts on the top of each airbox lid. The semi-open design was analyzed extensively to ensure that these additional inlets had no ill effect on temperatures or flow. However, the secondary airbox passages do allow an avenue for the induction soundtrack to escape the confines of its former plastic prison for everyone's benefit. Whether under hard acceleration, deceleration, or just spooling the amplified sounds are sure to make an impression. Gloss Carbon Fiber - G80/G82/G83/G87 OEM M4 CSL & M3 CS strut brace is not compatible with the Dinan intake.

• Larger volume air boxes (26% larger than stock) and tubes/plenum (50% larger than stock) allowing an increased volume of air to be utilized
• Reduced intake restriction for Increased turbo efficiency with greater power potential on modified builds
• Multiple finish options: Available in 2x2 Gloss or Matte Twill Carbon (Gloss Twill shown)
• More Flow: 12.4% increase over stock system (Stock: 815 CFM, Dinan: 916 CFM @ 28" H2O).
• 11% increase in filter area (stock: 65in², Dinan: 72in² per side) for optimum flow
• More robust and aggressive induction soundtrack
• Improved throttle response
• Bolt-on installation

Enhance your BMW's performance and appearance with the Dinan G8x Cold Air Intake System, designed specifically for 2021-2023 BMW M2, M3, and M4 models. This system combines exceptional function, sound, and aesthetics to deliver a noticeable upgrade over the stock intake. Featuring a larger airflow capacity, it provides a 12.4% increase in airflow (from 815 CFM to 916 CFM at 28" H2O), resulting in more efficient turbo operation and the potential for increased horsepower, especially on modified builds. The intake system's centerpiece is a single, symmetrical plenum that replaces the factory dual-track setup, offering a 50% larger volume and a cleaner, more aggressive engine bay appearance. The enlarged airboxes, which are 26% bigger than the stock units, house 11% larger cotton filters, ensuring superb filtration while maximizing airflow. These filters are fed through factory grill inlets and additional top-side cutouts on each airbox lid, carefully designed to maintain optimal temperature and flow. The semi-open design allows for enhanced induction sound, delivering a more robust and sporty engine note during acceleration, deceleration, and spool-up. Constructed with gloss or matte twill carbon fiber, the intake adds a high-end aesthetic touch to the engine bay. Installation is straightforward with bolt-on fitment, making it an ideal upgrade for enthusiasts seeking both performance gains and a visually striking engine compartment. Please note, this intake is not compatible with the OEM M4 CSL & M3 CS strut brace. The system is not CARB approved but complies with Prop 65 standards, and it requires acknowledgment of these conditions before installation. Elevate your driving experience with a system that improves throttle response, enhances induction sound, and provides increased airflow for maximum performance potential.

Features:

• Larger volume air boxes and plenum for increased airflow capacity

• Reduced intake restriction for improved turbo efficiency and power potential

• Available in gloss or matte twill carbon fiber finishes for custom aesthetics

• 12.4% airflow increase over stock, enhancing engine breathing

• 11% larger cotton air filters for optimal filtration and flow

• Enhanced induction sound for a more aggressive engine note

• Improved throttle response for quicker acceleration

• Bolt-on installation for easy upgrading

Fitment:
BMW M2 Base 2023
BMW M2 Base 2024
BMW M2 Base 2025
BMW M2 Base 2026
BMW M3 Base 2021
BMW M3 Base 2022
BMW M3 Base 2023
BMW M3 Base 2024
BMW M3 Base 2025
BMW M3 Base 2026
BMW M3 Competition 2021
BMW M3 Competition 2022
BMW M3 Competition 2023
BMW M3 Competition 2024
BMW M3 Competition 2025
BMW M3 Competition 2026
BMW M3 Competition xDrive 2022
BMW M3 Competition xDrive 2023
BMW M3 Competition xDrive 2024
BMW M3 Competition xDrive 2025
BMW M3 Competition xDrive 2026
BMW M4 Base 2021
BMW M4 Base 2022
BMW M4 Base 2023
BMW M4 Base 2024
BMW M4 Base 2025
BMW M4 Base 2026
BMW M4 Competition 2021
BMW M4 Competition 2022
BMW M4 Competition 2023
BMW M4 Competition 2024
BMW M4 Competition 2025
BMW M4 Competition 2026
BMW M4 Competition xDrive 2022
BMW M4 Competition xDrive 2023
BMW M4 Competition xDrive 2024
BMW M4 Competition xDrive 2025
BMW M4 Competition xDrive 2026
BMW M4 CSL 2023