Dinan 20-26 BMW X5 M/X6 M (F95/F96) Valved Axleback Exhaust System - Black Tips

To achieve desired sound volume and tone Dinan felt becoming of the F9x X5M/X6M the tubing was enlarged to 83mm (vs 80mm stock) to allow freer flow throughout the entirety of the system. The larger tubing is fed into a muffler that is typical of all Dinan exhaust design and utilizes absorption and reactive technologies designed to improve exhaust flow and reduce backpressure. The combination results in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. This is partly courtesy of the retained computer-controlled exhaust valves that limit noise during low-speed driving and open fully during high-load conditions to allow free flow and greater sound as the bulk of the gases are bypassing the muffler. Like all Dinan exhausts, our X5M/X6M free flow exhaust is engineered to reduce low-RPM drone so the cabin of the vehicle is still intimate and not drowned in an excessively loud tone. With the Dinan exhaust equipped on the X5M/X6M you get the best of both worlds; aggressive tone/sound and civility. A combination that is quintessential of the luxury SUV with a penchant for aggressive behavior. Stainless Steel - Black Tips - F95/F96

• Stock exhaust valve actuators reused, and operation of exhaust valve is unchanged so exhaust tone can be adjusted via the M-drive settings
• Computer controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions
• Four, diffuser filling, 4.5" (114mm) double-walled, black ceramic coated clamp-on tips with laser engraved Dinan logo
• Twin secondary exhaust valves are a whopping 76mm diameter, making them 30% less restrictive than the OE valves
• Drone abatement technologies used to reduce cabin resonance
• Larger diameter piping for increased flow (83mm vs. 80mm)
• Factory-like fitment with included mounting hardware
• Maximum gains of +6 HP and +5 ft-lb of torque
• 100% 304 Stainless Steel construction
• Enjoyably louder, sportier sound

Upgrade your BMW X5 M or X6 M with the Dinan F95/F96 Valved Axleback Exhaust System for a sportier sound and improved performance. Designed specifically for model years 2020 through 2023, this exhaust system features larger 83mm tubing (compared to the stock 80mm) to enhance exhaust flow and reduce backpressure, resulting in increased horsepower and torque. The system's dual secondary exhaust valves, measuring 76mm in diameter, are 30% less restrictive than OEM valves, promoting a more aggressive exhaust note while maintaining refined cabin acoustics.
Constructed entirely from durable 304 stainless steel, this exhaust system combines high-quality materials with a sleek black ceramic-coated finish on the four 4.5-inch double-walled tips, laser-engraved with the Dinan logo for a premium look. The exhaust integrates absorption and reactive technologies within the muffler to optimize flow and minimize low-RPM drone, ensuring a comfortable driving experience whether cruising or hard acceleration.
The system retains the factory exhaust valve actuators, allowing drivers to adjust the exhaust tone via M-drive settings, providing control over sound levels from civilized to aggressive. The included mounting hardware guarantees a factory-like fitment, ensuring straightforward installation. With maximum gains of approximately 6 horsepower and 5 ft-lb of torque, this system offers a notable performance boost along with an enjoyably louder, sportier exhaust tone. Perfectly blending luxury and performance, the Dinan F95/F96 Valved Axleback Exhaust System elevates your BMW's presence on the road without sacrificing comfort or civility.

Features:

• Larger 83mm tubing for increased exhaust flow and reduced backpressure

• Dual 76mm diameter secondary exhaust valves for less restriction and enhanced sound

• Constructed from 100% 304 stainless steel for durability and corrosion resistance

• Black ceramic-coated, double-walled 4.5-inch tips with laser engraving for a premium appearance

• Retains factory exhaust valve operation, allowing tone adjustment via M-drive

• Absorption and reactive technologies to minimize low-RPM drone and cabin resonance

• Factory-like fitment with included hardware for straightforward installation

• Maximum performance gains of approximately 6 HP and 5 ft-lb torque

• Enjoyably louder, sporty exhaust tone with a civilized low-speed demeanor

Fitment:
BMW X5 M 2020
BMW X5 M 2021
BMW X5 M 2022
BMW X5 M 2023
BMW X5 M Competition 2020
BMW X5 M Competition 2024
BMW X5 M Competition 2025
BMW X5 M Competition 2026
BMW X6 M 2020
BMW X6 M 2021
BMW X6 M 2022
BMW X6 M 2023
BMW X6 M Competition 2020
BMW X6 M Competition 2021
BMW X6 M Competition 2024
BMW X6 M Competition 2025
BMW X6 M Competition 2026