Dinan 15-19 BMW X5 M/X6 M (F85/F86) Carbon Fiber Cold Air Intake

The care that went into the filter design is what makes the system function as well as it does. The stock filters are restrictive with only a minuscule 89 inches in total filter area. The stock filters also only allow air to be drawn in from the front and rear instead of around the entire surface area. Dinan's custom filters, on the other hand, eliminate this wasted area and allow air to be drawn in from all around and increase the total filter area to 292.4 inches. That's a massive increase of 228% in filter area over the stock setup. In order to accommodate these massive filters the stock lid needed to be enlarged as much as the hood clearance would allow. This gave us the opportunity to implement it's signature carbon fiber look and appeal while also increasing the overall volume of the airbox by ~15%. The increased volume of the airbox allows the larger filters to ingest more air at any given moment and elicit a slightly more audible and sporty tone over its stock counterpart. This optimized design yields increased HP/TRQ throughout the power band and shows consistent gains over stage 1 when combined with the stage 2 DINANTRONICS Performance Tuner. Carbon Fiber - F85/F86

• Dinan filters draw air in from all around versus the stock filters which only draw from the front and back of the filter
• ~15% Larger volume air box via a Carbon Fiber lid that allows for the spacing needed for the larger filters
• 228% increase in filter area (stock: 44.5in² each, Dinan: 146.2in² each) for optimum flow
• More Power: + 23 HP @ 5500 RPM, + 25 LB-FT @ 4000 RPM (coupled w/ engine tuning)
• Improved throttle response
• Bolt-on installation
• Sportier Sound

Upgrade your BMW X5 M and X6 M (2015-2019 models) with the Dinan Carbon Fiber Cold Air Intake, designed to enhance performance and sound. This high-quality system features a carbon fiber lid that not only provides an aggressive, sporty appearance but also increases the volume of the airbox by approximately 15%, allowing for greater airflow. The larger volume combined with custom filters results in improved throttle response and a more dynamic driving experience. The filters draw air from all around the intake surface, significantly increasing the total filter area by 228% compared to stock filters, which only draw from the front and rear. This substantial increase in airflow capacity supports higher horsepower and torque gains, specifically +23 HP at 5500 RPM and +25 lb-ft at 4000 RPM when paired with engine tuning. The bolt-on installation process makes it straightforward to upgrade your vehicle without extensive modifications, providing an immediate performance boost.
Dinan's meticulous design ensures optimal airflow, which contributes to a sportier exhaust tone and improved overall engine efficiency. The intake system is engineered to maximize air intake while maintaining high-quality construction with a focus on durability and aesthetics, thanks to the signature carbon fiber finish. While the system is not CARB approved, it is engineered for performance and is suitable for enthusiasts seeking to extract the most from their vehicle. This intake is compatible with a range of 2015-2019 BMW X5 and X6 M models, making it a versatile upgrade for performance-minded drivers. Elevate your driving experience with this premium, bolt-on cold air intake that combines style, sound, and power enhancements in one package.

Features:

• Draws air from all around, increasing airflow efficiency

• Approximately 15% larger airbox volume with carbon fiber lid

• 228% increase in filter area over stock filters for optimum flow

• Provides +23 HP at 5500 RPM and +25 lb-ft torque at 4000 RPM when tuned

• Improves throttle response for a more immediate feel

• Simple bolt-on installation process

• Delivers a sportier sound for a more aggressive driving experience

Fitment:
BMW X5 M 2015
BMW X5 M 2016
BMW X5 M 2017
BMW X5 M 2018
BMW X6 M 2015
BMW X6 M 2016
BMW X6 M 2017
BMW X6 M 2018
BMW X6 M 2019