Dinan 00-03 BMW M5 (E39) Performance Spring Set

Dinan's Performance Spring set for the E39 M5 provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the vehicle by 1/4" in the front and a 1/4" in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot-peened for stress relief to last the life of the car. The increase in stiffness of the springs will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip for high-speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle. E39

• Vehicle lowered 1/4" in the front and rear
• Substantial reduction in body roll
• Shot peened for stress relief
• Preset to prevent spring sag
• Increased spring rates

Upgrade the handling characteristics of your E39 BMW M5 with the Dinan D100-0479 Performance Spring Set. Designed for the 2000, 2001, 2002, and 2003 BMW M5, these performance springs use carefully calibrated spring rates to reduce body roll, improve suspension control, and create a more responsive driving experience. Dinan lowers the vehicle approximately 1/4 inch at both the front and rear, improving suspension geometry while giving the M5 a more aggressive stance.
The increased spring rates help reduce rear suspension compression during acceleration and front suspension compression, or brake dive, under braking. This provides a more controlled feel through corners and during high-speed driving, while the reduced body roll allows the steering to respond more directly to driver input. The handling improvements are noticeable during everyday driving as well as spirited performance use.
Dinan manufactures the D100-0479 springs using high-tensile chrome silicon wire. Each spring is CNC wound, shot peened for stress relief, and preset to help prevent sag over time. This construction is designed to provide consistent performance and long-term durability when installed on a properly maintained suspension system. The spring set is engineered specifically for the E39 BMW M5 and is intended to complement the vehicle’s performance-oriented chassis.
Installation should be performed by a qualified technician, and a professional wheel alignment is recommended after installation to account for the revised ride height. Confirm vehicle application before ordering to ensure compatibility with your BMW M5.

Features:

• Fitment: Fits 2000-2003 BMW M5 E39

• Brand: Dinan

• Part Number: D100-0479

• Lowering: Lowers the vehicle approximately 1/4 inch in the front and rear

• Handling: Provides a substantial reduction in body roll and improved steering response

• Spring Rates: Increased rates improve control during acceleration, braking, and cornering

• Construction: CNC-wound from high-tensile chrome silicon wire

• Durability: Shot peened for stress relief and preset to help prevent spring sag

Fitment:
BMW M5 Base 2000
BMW M5 Base 2001
BMW M5 Base 2002
BMW M5 Base 2003