ARB / OME 2024+ Toyota 4Runner MT64 Coilover Strut Assembly - Front Med 20

Experience unmatched ride quality and control with the MT64 coilover assembly, engineered to handle every challenge. From demanding overlanding trips to the daily commute and every custom build in between, the MT64's huge 2.8in aluminum body and vehicle-specific damping ensure optimal performance across any terrain. This MT64 comes out of the box as an preassembled coilover, meaning its ready for install straight onto your vehicle. Set from factory to achieve 3in of lift on an stock weight vehicle, you also have the option to adjust the lift between 1.75-3in, using the included snap ring grooves. MT64 gives you the flexibility required to configure your ride to your specific needs. For the driver who demands a smooth, comfortable ride, day after day, in any terrain, MT64 is an clear choice.

• Designed with a hydraulic end zone top out, providing an added padding at the shock’s full extension, to help compensate for any unexpected bumps
• Complete coilover assembly allows for direct bolt in fitment, and providing 3in of lift on vehicles with stock to 220lbs of front end weight
• Aerospace grade aluminum body dissipates heat fifteen times faster than steel, and increases protection against stone damage
• Adjustable 6-position snap ring allows for a range of lifts from 1.75-3in giving you control of your build
• Digressive valving instantly reacts to changing surface conditions to maximize performance
• Monotube design with a massive 2.8in body allowing for more oil and accurate shock tuning
• Forged body cap and rod ends reduce weight while maintaining strength
• Direct replacement for stock and aftermarket lift kit

Upgrade the front suspension of your 2025-2026 Toyota 4Runner with the Old Man Emu MT64 coilover assembly, part number arbMT64996013. Designed for daily driving, overlanding, and custom builds, this preassembled front coilover provides a direct bolt-in installation and vehicle-specific damping for controlled performance across changing terrain. Factory configured to provide approximately 3 inches of lift on a stock-weight vehicle, the assembly can be adjusted from 1.75 to 3 inches to suit your vehicle setup and intended use.

• Hydraulic end-zone top-out control cushions the shock at full extension and helps absorb unexpected suspension movement


• Complete preassembled coilover design provides direct bolt-in fitment and approximately 3 inches of lift for vehicles with stock to 220 pounds of front-end weight


• Aerospace-grade aluminum body dissipates heat up to 15 times faster than steel and improves resistance to stone damage


• Six-position snap-ring adjustment provides lift settings from 1.75 to 3 inches


• Digressive valving responds quickly to changing surface conditions for improved ride control


• Monotube construction with a large 2.8-inch body provides increased oil capacity and precise shock tuning


• Forged body cap and rod ends help reduce weight while maintaining structural strength


• Direct replacement for factory suspension and compatible aftermarket lift kit applications

The Old Man Emu MT64 combines a durable monotube design with digressive valving to deliver a smooth, composed ride without sacrificing control. Its large aluminum shock body supports consistent performance during extended use by managing heat effectively, while the forged components provide strength for demanding trail and road conditions. The adjustable snap-ring positions allow the front suspension to be configured for the vehicle’s load, tire package, and desired stance.
This Old Man Emu front coilover assembly is engineered for the 2025 and 2026 Toyota 4Runner and is supplied as a complete, ready-to-install unit. It is a practical suspension upgrade for drivers seeking increased ground clearance, improved damping, and dependable performance for commuting, off-road travel, and overlanding. Professional installation and alignment are recommended after installation.

Features:

• Hydraulic end-zone top-out control cushions the shock at full extension

• Preassembled coilover provides direct bolt-in installation

• Approximately 3 inches of lift for stock-weight vehicles with up to 220 pounds of front-end weight

• Six-position snap-ring adjustment from 1.75 to 3 inches of lift

• Aerospace-grade aluminum body improves heat dissipation and stone protection

• Digressive valving adapts quickly to changing terrain

• Monotube design with a 2.8-inch body increases oil capacity and tuning precision

• Forged body cap and rod ends reduce weight while maintaining strength

• Direct replacement for factory and compatible aftermarket lift kit suspension

Fitment:
Toyota 4Runner Limited 2025
Toyota 4Runner Limited 2026
Toyota 4Runner Platinum 2025
Toyota 4Runner Platinum 2026
Toyota 4Runner SR5 2025
Toyota 4Runner SR5 2026
Toyota 4Runner Trailhunter 2025
Toyota 4Runner Trailhunter 2026
Toyota 4Runner TRD Off-Road 2025
Toyota 4Runner TRD Off-Road 2026
Toyota 4Runner TRD Off-Road Premium 2025
Toyota 4Runner TRD Off-Road Premium 2026
Toyota 4Runner TRD Sport 2025
Toyota 4Runner TRD Sport 2026
Toyota 4Runner TRD Sport Premium 2025
Toyota 4Runner TRD Sport Premium 2026