aFe Takeda Intakes Stage-2 AIS w/ Pro 5R Media Toyota C-HR 17-20 L4-2.0L

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 6 IN tall 360-degree radial flow air filter features a 4-1/2 IN flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The sealed heat-resistant housing, constructed of cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface and a clear sight window that allows for hassle-free filter inspection. An aluminum heat shield panel on the side of the housing deflects hot air emitted from the turbocharger, ensuring the system’s two air inlets bring in the coolest air possible. In addition to the massive auxiliary air inlet, this intake utilizes the vehicle’s OE air inlet with no additional hardware. Stainless-steel clamps and a silicone coupler are included for strength and durability. Momentum GT’s innovative filter-to-housing design minimizes the total number of parts, making for a fast and easy installation. Takeda Stage-2 Cold Air Intake System w/ Pro 5R Filter Toyota C-HR 17-22 L4-2.0L

• Innovative Housing Features Heat-Blocking Aluminum Panel and Two Air Inlets to Draw in Cool Air
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Reinforced Silicone Intake Tube Easily Mates to Air Filter
• Measured Flow: 305 CFM @ 7 IN H2O
• Outflows Factory Intake by 11%
• +7 lbs. x ft. TQ & +6 HP

Upgrade your Toyota C-HR with the aFe Takeda Stage-2 Cold Air Intake System, designed to maximize airflow and boost engine performance. This innovative intake features a large 6-inch tall, 360-degree radial flow air filter with a 4-1/2-inch flange and our premium Pro 5R media, which incorporates five layers of progressively finer cotton gauze media for optimal filtration and maximum airflow. The inverted top design increases filter surface area, extending service intervals and ensuring consistent performance. The sealed heat-resistant housing, made from cross-linked polyethylene (XLPE), incorporates a patent-pending filter-to-housing interface that simplifies installation and reduces the number of parts needed. A clear sight window allows for easy inspection of the filter without disassembly, while the aluminum heat shield deflects hot turbocharged air, helping to draw in cooler, denser air for improved combustion. The intake system includes two air inlets, one drawing in ambient air through the vehicle’s OE inlet and another auxiliary inlet for increased airflow, both contributing to enhanced power and efficiency. The reinforced silicone intake tube ensures a secure fit to the filter, and stainless-steel clamps provide durability and reliability. Measured at 305 CFM at 7 inches of water, this intake outperforms the factory system by approximately 11%, delivering an estimated +6 horsepower and +7 lbs. of torque for increased acceleration and overall engine responsiveness. Its design emphasizes quick installation, requiring minimal hardware, making it suitable for both street and track use. This product is not CARB approved and requires acknowledgment of this status prior to installation. Built to fit 2018-2022 Toyota C-HR models with 2.0L engines, the aFe Takeda Stage-2 intake offers a combination of performance, durability, and ease of installation to enhance your driving experience.

Features:

• Innovative housing features heat-blocking aluminum panel and dual air inlets to draw in cool air

• Patent-pending filter-to-housing interface with minimal hardware for fast and easy installation

• Washable and reusable Pro 5R air filter with five layers of cotton gauze media for maximum performance

• Reinforced silicone intake tube for secure attachment to the air filter

• Measured airflow of 305 CFM at 7 inches of water pressure

• Outperforms factory intake by approximately 11%

• Provides estimated +6 horsepower and +7 lbs. of torque

• Includes stainless-steel clamps and durable silicone coupler for secure fit

• Clear sight window for hassle-free filter inspection

• Aluminum heat shield deflects hot turbocharged air to draw in cooler air for better performance

Fitment:
Toyota C-HR LE 2019
Toyota C-HR LE 2020
Toyota C-HR LE 2021
Toyota C-HR LE 2022
Toyota C-HR Limited 2019
Toyota C-HR Limited 2020
Toyota C-HR Limited 2021
Toyota C-HR Limited 2022
Toyota C-HR Nightshade 2021
Toyota C-HR Nightshade 2022
Toyota C-HR XLE 2018
Toyota C-HR XLE 2019
Toyota C-HR XLE 2020
Toyota C-HR XLE 2021
Toyota C-HR XLE 2022
Toyota C-HR XLE Premium 2018