{"product_id":"aem-cd-5l-carbon-logging-flush-digital-dash-display","title":"AEM CD-5L Carbon Logging Flush Digital Dash Display","description":"AEM CD5 Carbon Flat Panel Digital Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon car dashboard monitors, but do not have buttons or an LED shade hood built into the enclosure. AEM CD5 Carbon Flat Panel Digital Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the car dashboard monitor's enclosure and are fully programmable\nFlat Panel Digital Dash Display, CD-5L logging, non-GPS racing dash, CAN input only, 5-inch diagonal screen, carbon fiber enclosure, wiring harness included, Does Not Include Buttons (See PN 30-3610)\n\u003cul\u003e\n  \u003cli\u003eAdd Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)\u003c\/li\u003e\n  \u003cli\u003eInstall on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212) or 6 Channel CAN Sensor Module (PN 30-2226)\u003c\/li\u003e\n  \u003cli\u003eInstall 8 additional temp inputs and send them to the CD Carbon Dash with our 8 Channel K-Type EGT CAN Module (PN 30-2224, sold separately)\u003c\/li\u003e\n  \u003cli\u003eSeven programmable pages including four Main pages, Alarm, On-Change and Start-up pages (requires Button Kit PN 30-3610)\u003c\/li\u003e\n  \u003cli\u003eAccepts channels from 2008-up factory ECUs using Plug \u0026amp; Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)\u003c\/li\u003e\n  \u003cli\u003eDedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)\u003c\/li\u003e\n  \u003cli\u003eTwo extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)\u003c\/li\u003e\n  \u003cli\u003eUnique On-Change page can be used to identify map switching for boost, traction, lap times, etc.\u003c\/li\u003e\n  \u003cli\u003eUse the included page layouts and input your channels and text, or create your own from scratch\u003c\/li\u003e\n  \u003cli\u003eOver 200 supplied fully programmable SAE and custom warning icons, and you can add your own\u003c\/li\u003e\n  \u003cli\u003eUser supplied graphics can be changed based on channel values (up to the full screen size)\u003c\/li\u003e\n  \u003cli\u003eAccepts channels from AEMnet CAN-enabled devices and non-AEM CAN bus devices side by side\u003c\/li\u003e\n  \u003cli\u003eSeven LED RPM\/shift light indicators on top of the housing (programmable and dimmable)\u003c\/li\u003e\n  \u003cli\u003ePlug \u0026amp; Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs\u003c\/li\u003e\n  \u003cli\u003eAvailable with or without 200Mb internal logging (up to 1,000Hz\/channel)\u003c\/li\u003e\n  \u003cli\u003eHeadlight-in' connection dims the dash and LEDs during night operation\u003c\/li\u003e\n  \u003cli\u003eWiring interface\/harnesses are identical between all CD Carbon Dashes\u003c\/li\u003e\n  \u003cli\u003eDirect sunlight readable (1000cd\/m2 brightness and anti-glare filter)\u003c\/li\u003e\n  \u003cli\u003eAvailable with or without onboard 20 Hz GPS receiver and antenna\u003c\/li\u003e\n  \u003cli\u003eRugged, lightweight flow-molded carbon fiber composite enclosure\u003c\/li\u003e\n  \u003cli\u003eLayout files interchangeable between all CD Carbon Dashes\u003c\/li\u003e\n  \u003cli\u003eConvert CAN bus channel values to user-defined text\u003c\/li\u003e\n  \u003cli\u003eFull color 5\" screen with 800x480 resolution\u003c\/li\u003e\n  \u003cli\u003eFree DashDesign Graphics Editor software\u003c\/li\u003e\n  \u003cli\u003eIP66 water resistance\u003c\/li\u003e\n  \u003cli\u003eTwo programmable LEDs\u003c\/li\u003e\n  \u003cli\u003eOdometer function\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe AEM CD-5L Carbon Logging Flush Digital Dash Display, part number 30-5601F, is designed for flush-mount installations and in-dash enclosures with limited clearance. This non-GPS racing dash uses CAN input and features a full-color, daylight-readable display housed in a slim, lightweight flow-molded carbon fiber composite enclosure. The rugged design provides IP66 water resistance for demanding motorsport and automotive applications.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eThe 5-inch display provides clear, high-contrast information with an 800 x 480 resolution, direct-sunlight readability, and an anti-glare filter. Seven ultra-bright LEDs across the top of the enclosure function as programmable and dimmable RPM indicators or shift lights. Drivers can configure LED activation points and flashing behavior across the selected RPM range. Two additional programmable LEDs support custom alerts or status indications, while two switch inputs can display user-triggered events such as turn signals or high beams.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWith CD-5L logging capability, the dash can record supported channels at rates up to 1,000 Hz per channel. It accepts data from AEMnet CAN-enabled devices and compatible non-AEM CAN bus devices, while included page layouts can be customized using AEM DashDesign Graphics Editor software. Seven programmable pages support main displays, alarms, on-change events, and startup information. The dedicated Alarm page, user-defined graphics, warning icons, channel-to-text conversion, and odometer function help provide flexible data presentation for racing and performance vehicles. A wiring harness is included. This display does not include buttons; the AEM Remote Button Kit, part number 30-3610, is sold separately and is required for page changes and memory clearing. Optional CAN modules and adapter cables expand compatibility with factory ECUs, aftermarket ECUs, additional temperature sensors, and other vehicle data sources.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFlush-mount digital dash display designed for tight in-dash installations\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAEM CD-5L logging model with CAN input and internal data logging\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFull-color 5-inch screen with 800 x 480 resolution\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDirect-sunlight readable display with 1000 cd\/m² brightness and anti-glare filter\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLightweight, rugged flow-molded carbon fiber composite enclosure\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeven programmable and dimmable RPM or shift light LEDs\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwo additional programmable LEDs for custom alerts and status indications\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeven programmable display pages with main, alarm, on-change, and startup layouts\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDedicated user-defined Alarm page for quickly identifying vehicle problems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSupports AEMnet CAN devices and compatible non-AEM CAN bus devices\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eInternal logging supports recording rates up to 1,000 Hz per channel\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwo switch inputs support user-triggered events such as blinkers and high beams\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes wiring harness; remote button kit is sold separately\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with optional CAN sensor modules, EGT modules, and ECU adapter cables\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIP66 water-resistant enclosure\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIncludes odometer function and free AEM DashDesign Graphics Editor software\u003c\/li\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":54022156583228,"sku":"aem30-5601F","price":1606.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1865\/9007\/files\/87eae70951e99413529da20fd8585df8.jpg?v=1787700601","url":"https:\/\/necycleshop.com\/products\/aem-cd-5l-carbon-logging-flush-digital-dash-display","provider":"NE Cycle Shop","version":"1.0","type":"link"}