{"product_id":"action-clutch-08-17-mitsubishi-lancer-2-0l-2-4l-4b11-4b12-non-turbo-stage-3-clutch-1ms-w-slave","title":"Action Clutch 08-17 Mitsubishi Lancer 2.0L\/2.4L (4B11\/4B12) Non-Turbo Stage 3 Clutch (1MS) w\/Slave","description":"Action Clutch's Stage 3 (1MS) Clutch Kit is designed to withstand even the most challenging conditions. Featuring a heavy-duty single diaphragm pressure plate, reinforced drive straps, and a Sprung MIBA Ceramic (available in a 4 or 6 puck) disc, this kit provides peak performance and extreme durability for low\/mild horsepower vehicles. Our Sprung MIBA Ceramic clutch kit provides quicker engagement and will introduce some clutch chatter, which will minimize after proper break-in. For those looking to take their vehicles to the next level, the Stage 3 (1MS) Action Clutch Kit provides maximum control and power with little compromise on reliability. At Action Clutch, safety is our top priority. We understand how catastrophic engine or transmission damage can be caused by springs popping out which is why we use our patented, fully enclosed spring retainers to keep your investment protected at all times. Every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time. 170% INCREASED HOLDING CAPACITY OVER FACTORY KIT HEAVY-DUTY STREET USE AND OCCASIONAL DRAG \/ ROAD \/ DRIFT RACING\nStage 3 Clutch Kit (1MS) for Mitsubishi Lancer 2008-2017 2.0L, 2.4L DOHC (4B11, 4B12) Non-Turbo Includes\n\u003cp\u003eUpgrade your 2008-2017 Mitsubishi Lancer with the Action Clutch ACR-1180 Stage 3 (1MS) Clutch Kit, engineered for dependable street performance and occasional drag, road, or drift racing. Designed for Lancer models equipped with the 2.0L or 2.4L DOHC 4B11 or 4B12 non-turbo engine, this kit delivers a 170% increase in holding capacity over the factory clutch while maintaining practical drivability for low- to mild-horsepower applications.\u003c\/p\u003e\n\u003cp\u003eThe kit features a heavy-duty single-diaphragm pressure plate, reinforced drive straps, and a sprung MIBA ceramic disc available in a four- or six-puck configuration. The ceramic friction material supports quicker engagement and improved control under demanding use, though some clutch chatter may occur during initial operation and typically decreases after proper break-in. This combination provides enhanced power transfer and durability without sacrificing the reliability required for regular street driving.\u003c\/p\u003e\n\u003cp\u003eAction Clutch incorporates patented, fully enclosed spring retainers to help prevent springs from dislodging and potentially damaging the engine or transmission. Each ACR-1180 kit is quality checked and approved by an experienced Action Clutch engineer before release, supporting consistent performance and added peace of mind. The included slave cylinder helps provide a complete installation solution for compatible Lancer applications.\u003c\/p\u003e\n\u003cp\u003eFeature: Stage 3 (1MS) performance clutch kit for 2008-2017 Mitsubishi Lancer models with 2.0L or 2.4L DOHC 4B11 or 4B12 non-turbo engines.\u003cbr\u003eFeature: 170% increased holding capacity over the factory clutch.\u003cbr\u003eFeature: Heavy-duty single-diaphragm pressure plate with reinforced drive straps.\u003cbr\u003eFeature: Sprung MIBA ceramic disc for quicker engagement and improved control.\u003cbr\u003eFeature: Suitable for heavy-duty street use and occasional drag, road, or drift racing.\u003cbr\u003eFeature: Fully enclosed spring retainers help protect against spring-related clutch damage.\u003cbr\u003eFeature: Includes slave cylinder and is quality checked by Action Clutch engineers.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStage 3 (1MS) clutch kit engineered for 2008-2017 Mitsubishi Lancer 2.0L and 2.4L DOHC 4B11 or 4B12 non-turbo applications\u003c\/li\u003e\n\u003cli\u003e170% increased holding capacity over the factory clutch\u003c\/li\u003e\n\u003cli\u003eHeavy-duty single-diaphragm pressure plate with reinforced drive straps\u003c\/li\u003e\n\u003cli\u003eSprung MIBA ceramic disc available in a four- or six-puck configuration\u003c\/li\u003e\n\u003cli\u003eQuicker engagement with clutch chatter that can lessen after proper break-in\u003c\/li\u003e\n\u003cli\u003eDesigned for heavy-duty street use and occasional drag, road, or drift racing\u003c\/li\u003e\n\u003cli\u003ePatented fully enclosed spring retainers help protect against spring dislodgement\u003c\/li\u003e\n\u003cli\u003eIncludes slave cylinder for a more complete installation\u003c\/li\u003e\n\u003cli\u003eQuality checked and approved by Action Clutch engineers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitment:\u003cbr\u003e\nMitsubishi Lancer DE 2008\u003cbr\u003e\nMitsubishi Lancer DE 2009\u003cbr\u003e\nMitsubishi Lancer DE 2010\u003cbr\u003e\nMitsubishi Lancer DE 2011\u003cbr\u003e\nMitsubishi Lancer DE 2012\u003cbr\u003e\nMitsubishi Lancer DE 2013\u003cbr\u003e\nMitsubishi Lancer ES 2008\u003cbr\u003e\nMitsubishi Lancer ES 2009\u003cbr\u003e\nMitsubishi Lancer ES 2010\u003cbr\u003e\nMitsubishi Lancer ES 2011\u003cbr\u003e\nMitsubishi Lancer ES 2012\u003cbr\u003e\nMitsubishi Lancer ES 2013\u003cbr\u003e\nMitsubishi Lancer ES 2014\u003cbr\u003e\nMitsubishi Lancer ES 2015\u003cbr\u003e\nMitsubishi Lancer ES 2016\u003cbr\u003e\nMitsubishi Lancer ES 2017\u003cbr\u003e\nMitsubishi Lancer ES Sportback 2011\u003cbr\u003e\nMitsubishi Lancer ES Sportback 2012\u003cbr\u003e\nMitsubishi Lancer ES Sportback 2013\u003cbr\u003e\nMitsubishi Lancer ES Sportback 2014\u003cbr\u003e\nMitsubishi Lancer GT 2012\u003cbr\u003e\nMitsubishi Lancer GT 2013\u003cbr\u003e\nMitsubishi Lancer GT 2014\u003cbr\u003e\nMitsubishi Lancer GT 2015\u003cbr\u003e\nMitsubishi Lancer GT 2016\u003cbr\u003e\nMitsubishi Lancer GT Sportback 2012\u003cbr\u003e\nMitsubishi Lancer GT Sportback 2013\u003cbr\u003e\nMitsubishi Lancer GT Sportback 2014\u003cbr\u003e\nMitsubishi Lancer GTS 2008\u003cbr\u003e\nMitsubishi Lancer GTS 2009\u003cbr\u003e\nMitsubishi Lancer GTS 2010\u003cbr\u003e\nMitsubishi Lancer GTS 2011\u003cbr\u003e\nMitsubishi Lancer GTS Sportback 2010\u003cbr\u003e\nMitsubishi Lancer GTS Sportback 2011","brand":"Action Clutch","offers":[{"title":"Default Title","offer_id":67598399963452,"sku":"aonACR-1180","price":1054.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1865\/9007\/files\/786d27fcd9b1875157679b27c717446bL_8245ff26-1e99-4693-8e33-3cd6f11a21e2.png?v=1790646860","url":"https:\/\/necycleshop.com\/products\/action-clutch-08-17-mitsubishi-lancer-2-0l-2-4l-4b11-4b12-non-turbo-stage-3-clutch-1ms-w-slave","provider":"NE Cycle Shop","version":"1.0","type":"link"}