Acerbis 16-22 KTM 250-350 SX-F/XC-F/ Husq 250-350 FC/FX/ 21-23 GasGas EX/MCX-Power Kit - Black
$90.99
- Motor Crankcase and Ignition/Clutch covers that protect against wear from boots, impacts, dirt, mud, and other debris
- The right side provides protection for the clutch cover, water pump, and lower casing
- Easy to install by utilizing the original crankcase and ignition/clutch cover bolts
- The left side provides protection to the ignition cover and clutch actuator
- Molded openings to access the filter cover and oil cap
- Designed not to interfere with boots
- Compatible with ACERBIS skid plates
- Resistant to high temperatures
Protect your motorcycle’s engine cases from boot wear, impacts, dirt, mud, and trail debris with the Acerbis Power Kit Engine Case Protection in black. Designed for select KTM, Husqvarna, and GasGas motocross and off-road models, this kit helps shield vulnerable crankcase, ignition cover, clutch cover, water pump, and lower casing areas during demanding riding conditions. Acerbis part number ACB2732130001 provides durable coverage while maintaining practical access to important service points.
The right-side protector covers the clutch cover, water pump, and lower engine casing, while the left-side protector guards the ignition cover and clutch actuator. Molded openings provide access to the filter cover and oil cap, helping simplify routine maintenance without requiring removal of the protection kit. The design is shaped to avoid interference with riding boots, allowing normal rider movement and control operation.
Installation is straightforward and uses the motorcycle’s original crankcase and ignition or clutch cover bolts. The high-temperature-resistant construction is suited to the heat generated during motocross, enduro, and off-road use. This Acerbis Power Kit is also compatible with Acerbis skid plates, making it a practical addition to a coordinated protection setup. Fitment includes select 2016–2018 KTM 250 SX-F and 350 SX-F models, 2016–2018 Husqvarna FC250 and FC350 models, and select 2021–2023 GasGas EX and MC models. Verify the specific motorcycle application before installation.
Features:
- Engine Case Protection: Helps protect the motor crankcase, ignition cover, clutch cover, water pump, and lower casing from boots, impacts, dirt, mud, and debris.
- Two-Sided Coverage: Provides dedicated protection for vulnerable engine components on both the left and right sides.
- Maintenance Access: Molded openings allow access to the filter cover and oil cap without removing the protectors.
- Boot-Friendly Design: Shaped to help prevent interference with motorcycle boots and normal rider movement.
- Easy Installation: Uses the original crankcase and ignition or clutch cover bolts for installation.
- High-Temperature Resistance: Built to withstand the heat generated during demanding powersports use.
- Skid Plate Compatibility: Designed to work with Acerbis skid plates for expanded motorcycle protection.
- Vehicle
Fitment:
Husqvarna FC250 Base 2016
Husqvarna FC250 Base 2017
Husqvarna FC250 Base 2018
Husqvarna FC250 Base 2019
Husqvarna FC250 Base 2020
Husqvarna FC250 Base 2021
Husqvarna FC250 Base 2022
Husqvarna FC350 Base 2016
Husqvarna FC350 Base 2017
Husqvarna FC350 Base 2018
Husqvarna FC350 Base 2019
Husqvarna FC350 Base 2020
Husqvarna FC350 Base 2021
Husqvarna FC350 Base 2022
Husqvarna FX350 Base 2020
Husqvarna FX350 Base 2021
Husqvarna FX350 Base 2022
KTM 250 SX-F Base 2016
KTM 250 SX-F Base 2017
KTM 250 SX-F Base 2018
KTM 250 SX-F Base 2019
KTM 250 SX-F Base 2020
KTM 250 SX-F Base 2021
KTM 250 SX-F Base 2022
KTM 250 XC-F Base 2019
KTM 250 XC-F Base 2020
KTM 250 XC-F Base 2021
KTM 250 XC-F Base 2022
KTM 350 SX-F Base 2016
KTM 350 SX-F Base 2017
KTM 350 SX-F Base 2018
KTM 350 SX-F Base 2019
KTM 350 SX-F Base 2020
KTM 350 SX-F Base 2021
KTM 350 SX-F Base 2022
KTM 350 XC-F Base 2019
KTM 350 XC-F Base 2020
KTM 350 XC-F Base 2021
KTM 350 XC-F Base 2022