ST XTA-Plus 3 Adjustable Coilovers BMW E46 M3 Coupe/Convertible (Incl. CSL)

The XTA plus 3 coilover kit gives your car maximum performance for the road and the tools you need for any challenge. From the factory, the XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high-speed and low- speed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high-speed and low-speed compression damping and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn't matter if you bolt in an aftermarket roll cage, weld in a cage, upgrade to spherical bushing or changed wheel loads - the XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the XTA plus 3 also includes a parts approval certificate, race springs and aluminium unibal top mounts. Easy lowering adjustment: Like all ST coilovers the ride height adjustment is made via seamless thread on the galvanized strut housing. This even allows the ride height to be adjusted even when the kit is installed by adjustubg the spring perch higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction. KW Engineering: Exclusive for ST suspension. The high-quality ST XTA plus 3 coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions. The most versatile ST coilover kit ever built. Seamless ride height adjustability, aluminum unibal top mounts, 24 clicks of low-speed and high-speed compression adjustability, 18 clicks of rebound adjustability put you in absolute control! ST Coilover Kits enable you to individually adjust the ride height of your car to improve the appearance and driving behavior. Depending on your selection, ST coilover kits offer a wide range of adjustments giving you the tools needed to dial them into your requirements. 2001-2006 BMW M3 (E46) Coupe + Convertible 3.2 (6cyl.)

• Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
• Composite spring perch made from wear-resistant, friction-optimized polyamide composite with an embedded stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
• ST coilovers are built by hand by the experts at KW in Fichtenberg, Germany. Each damper is tested on a shock dyno to verify it's making the proper forces before being put into the ST box.
• Seamless Ride Height Adjustment - ST's composite spring perch and unique trapezoidal thread pitch make ride height adjustability a breeze so you can dial in your preferred look.
• From the factory, the XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high- and lowspeed compression as well as adjustable rebound damping.
• Linear race spring system provides a consistent response while driving and makes it easy to swap rates to further personalize your setup.
• Aluminum unibal top mounts improve steering response and feedback while allowing you to dial in your camber when applicable.
• Galvanized steel housing for improved resistance to corrosion.
• 5 Year Limited Warranty - Unlimited Mileage
• Made in Germany

Enhance your BMW M3 E46 with the ST Suspensions XTA-Plus 3 coilover kit, engineered for maximum performance and versatility on both road and track. This premium kit features KW dampers with adjustable high-speed and low-speed compression settings, offering 24 clicks of adjustment each, along with 18 clicks of rebound damping control. These features empower you to fine-tune your suspension for optimal handling, comfort, or aggressive cornering, regardless of modifications like aftermarket roll cages or wheel load changes. The seamless ride height adjustment is facilitated through a galvanized threaded housing, allowing you to easily dial in your preferred stance even after installation, making it ideal for personalized setups and visual appeal.

Features:

• High-Performance KW Dampers: Adjustable in high- and low-speed compression with 24 clicks each, plus 18 clicks of rebound damping for precise control.

• Seamless Ride Height Adjustment: Easily change ride height via threaded spring perch, even with the coilovers installed, for customizable look and handling.

• Durable Construction: Galvanized steel housing with multiple seals ensures resistance to corrosion and dirt, suitable for all weather conditions.

• Aluminum Unibal Top Mounts: Improve steering response and feedback, with the ability to adjust camber when needed for better alignment and handling.

• Includes Race Springs and Certified Components: Comes with race springs, parts approval certificate, and elastomer bump stops with integrated dust protection to prevent dirt ingress and maintain ride quality.

• Premium Manufacturing: Hand-built by KW engineers in Germany, each damper is tested on a shock dyno to ensure proper force output and durability, backed by a 5-year limited warranty with unlimited mileage.

Fitment:
BMW M3 Base 2001
BMW M3 Base 2002
BMW M3 Base 2003
BMW M3 Base 2004
BMW M3 Base 2005
BMW M3 Base 2006