AWE Tuning 19-23 BMW 330i / 21-23 BMW 430i Base G2X Track Edition Axle-Back Exhaust - Diamond Black

Beginning after the secondary catalyst, the AWE Track Edition picks up right before the rear axle and provides a full single 3” route from this point, then splits to dual 3” tip outlets. The Track Edition has absolutely zero filter -- making its sole purpose to increase the volume out of the B48 engine while remaining completely 50-state emissions compliant (and saving weight and dollars along the way). A simple cut (at the factory cut point) is all it takes, and the Track Edition goes into place via four bolt-on locations. AWE includes a factory clamp for the cut point that allows drivers to easily swap back to their stock rear section if ever needed. Here’s some helpful guidance if you’re deciding between kits: Due to the structural differences between the 330i and 430i, we are recommending the following per application: for the 330i, with all factory emissions equipment in place, the Track Edition is recommended for those wanting an elevated exhaust experience from within the cabin. If you plan to upgrade anything further upstream on a 330i, consider the Touring Edition - if you go Touring Edition on your 330i without any upstream modifications, it will resemble the stock sound in the cabin. On the 430i, interior acoustics (since it’s a coupe) differ when compared to its sedan sibling -- aka it’s louder inside. So, for you 430i drivers, we are recommending the Touring Edition, as the sound is much more pronounced in the cabin on the 430i. The Track Edition on the 430i is a bit rowdy. TLDR: 330i go Track Edition, 430i go Touring Edition! AWE Track Edition Axleback Exhaust for BMW G2X 330i/430i - Diamond Black

• Crafted from CNC mandrel-bent 3” U.S.-sourced .065” wall T304L stainless steel
• Included OEM sleeve clamp allows easy conversion back to stock exhaust if needed
• Less is more: clean, straight-through design maximizes performance
• Dual 4.5” slash-cut tips in diamond black
• Direct bolt-on for factory-like simplicity
• AWE Valve Simulator Brackets included
• Features the AWE No CEL Guarantee
• Engineered for coupe and sedan
• Perfect fitment, guaranteed
• 50-state emissions legal
• Lifetime warranty

Experience enhanced exhaust flow and aggressive sound with the AWE Tuning G2X Track Edition Axle-Back Exhaust designed specifically for BMW 330i and 430i models from 2019 to 2023. Crafted from CNC mandrel-bent 3-inch T304L stainless steel sourced in the United States, this exhaust system delivers durability and performance. The straight-through design maximizes exhaust volume and flow, increasing engine sound and power while adhering to all 50-state emissions regulations. The dual 4.5-inch slash-cut tips in diamond black finish add a sleek, sporty aesthetic to your vehicle's rear end. Installation is straightforward with four bolt-on points, and the included OEM sleeve clamp allows easy reversion to stock if needed. This exhaust system is engineered for both coupe and sedan configurations, providing a perfect fit for each body style. The inclusion of AWE Valve Simulator Brackets ensures optimal valve operation, while the No CEL Guarantee offers peace of mind against check engine lights. With a lifetime warranty, this exhaust is a reliable upgrade for enthusiasts seeking a more spirited driving experience. For BMW 330i owners, the Track Edition is ideal if factory emissions equipment remains intact and an elevated exhaust note is desired within cabin comfort. Meanwhile, 430i owners may prefer the Touring Edition for a more refined sound, as the Track Edition tends to be more aggressive inside the coupe. Overall, the AWE Tuning axle-back exhaust combines performance, style, and compliance, making it a premier choice for BMW enthusiasts looking to elevate their vehicle’s sound and appearance.

Features:

• Crafted from CNC mandrel-bent 3-inch T304L stainless steel for durability and strength

• Dual 4.5-inch slash-cut tips in a sleek diamond black finish

• Includes OEM sleeve clamp for quick and easy reinstallation to stock configuration

• Straight-through design maximizes exhaust volume and flow for increased performance

• Compatible with coupe and sedan BMW G2X models from 2019 to 2023

• Engineered for perfect fitment with guaranteed compatibility

• s AWE Valve Simulator Brackets for optimal valve operation

• 50-state emissions legal, ensuring compliance across the United States

• Includes AWE No CEL Guarantee to prevent check engine lights

• Lifetime warranty for lasting performance and peace of mind

Fitment:
BMW 330i Base 2019
BMW 330i Base 2020
BMW 330i Base 2021
BMW 330i Base 2022
BMW 330i Base 2023
BMW 330i Base 2024
BMW 330i xDrive Base 2019
BMW 330i xDrive Base 2020
BMW 330i xDrive Base 2021
BMW 330i xDrive Base 2022
BMW 330i xDrive Base 2023
BMW 330i xDrive Base 2024
BMW 430i Base 2021
BMW 430i Base 2022
BMW 430i Base 2023
BMW 430i Base 2024
BMW 430i xDrive Base 2021
BMW 430i xDrive Base 2022
BMW 430i xDrive Base 2023
BMW 430i xDrive Base 2024